XDP HD Gear Reduction Starter (New) Wrinkle Black XD256
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from XDP
You can rely on the XDP HD Gear Reduction Starter (New) Wrinkle Black XD256 to get your 2008-2010 Ford 6.4L Powerstroke running in the most extreme environments. XDP's HD Gear Reduction Starters are faster, stronger, and more durable than your factory starter. This gives you the ability to turn over even the most aggressive diesel engines. XDP's HD Gear Reduction Starters feature a more efficient motor that is quicker, and draws less amperage. The Gear Reduction Design produces more torque than a factory unit. Each starter comes pre-tested, ready for installation and features a durable "Wrinkle Black" finish for corrosion resistance and aesthetics.
Features:
HD Gear Reduction DesignWrinkle Black Finish Increased Durability 1-Year Warranty
Specifications:
4.0 HP3.0 KW275 Ft-Lbs. Torque 4.75:1 Gear Reduction Tech
Notes:
Depending on the conditions, a starter can pull up to 500 amps. These levels of amperage stress ALL components in the circuit including cables, terminals, batteries, and more. Problems with these components can be difficult to diagnose as they appear fine at rest and under a light load, but generate high resistance under heavy amperage draws. This results in low voltage to the starter while cranking, causing heavier amperage draw, and increased heat leading to starter failure. Batteries, cables and additional components should be checked and serviced regularly. Voltage measured at the starter during cranking should always be above 11V DC. Starter heat shields are not required, but are an excellent idea for heat protection.This starter is not intended for use on a 6.0L Powerstroke. Using a 6.4L starter to "upgrade" the 6.0L unit can often result in premature failure due to excessive amperage draw. Starter failure due to improper application is not covered by warrantyWarrantyAll product warranties if any, implied have been done so at the discretion of the manufacturer. If you need warranty assistance on any product you've purchased, please contact the manufacturer directly.Products manufactured by XDP carry a 2-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to two (2) years from the date of sale and limited solely to the parts contained within the product's kit. All products that are in question of Warranty must be returned shipping prepaid to XDP and must be accompanied by a dated proof of purchase receipt. Warranty is limited to the original purchaser.Under no circumstances shall the Xtreme Diesel Performance, LLC. be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses. YEAR MAKE MODEL FOR ENGINE SERIES 2008 Ford F-250 Super Duty 6.4 2009 Ford F-250 Super Duty 6.4 2010 Ford F-250 Super Duty 6.4 2008 Ford F-350 Super Duty 6.4 2009 Ford F-350 Super Duty 6.4 2010 Ford F-350 Super Duty 6.4 2008 Ford F-450 Super Duty 6.4 2009 Ford F-450 Super Duty 6.4 2010 Ford F-450 Super Duty 6.4 2008 Ford F-550 Super Duty 6.4 2009 Ford F-550 Super Duty 6.4 2010 Ford F-550 Super Duty 6.4
You can rely on the XDP HD Gear Reduction Starter (New) Wrinkle Black XD256 to get your 2008-2010 Ford 6.4L Powerstroke running in the most extreme environments. XDP's HD Gear Reduction Starters are faster, stronger, and more durable than your factory starter. This gives you the ability to turn over even the most aggressive diesel engines. XDP's HD Gear Reduction Starters feature a more efficient motor that is quicker, and draws less amperage. The Gear Reduction Design produces more torque than a factory unit. Each starter comes pre-tested, ready for installation and features a durable "Wrinkle Black" finish for corrosion resistance and aesthetics.
Features:
HD Gear Reduction DesignWrinkle Black Finish Increased Durability 1-Year Warranty
Specifications:
4.0 HP3.0 KW275 Ft-Lbs. Torque 4.75:1 Gear Reduction Tech
Notes:
Depending on the conditions, a starter can pull up to 500 amps. These levels of amperage stress ALL components in the circuit including cables, terminals, batteries, and more. Problems with these components can be difficult to diagnose as they appear fine at rest and under a light load, but generate high resistance under heavy amperage draws. This results in low voltage to the starter while cranking, causing heavier amperage draw, and increased heat leading to starter failure. Batteries, cables and additional components should be checked and serviced regularly. Voltage measured at the starter during cranking should always be above 11V DC. Starter heat shields are not required, but are an excellent idea for heat protection.This starter is not intended for use on a 6.0L Powerstroke. Using a 6.4L starter to "upgrade" the 6.0L unit can often result in premature failure due to excessive amperage draw. Starter failure due to improper application is not covered by warrantyWarrantyAll product warranties if any, implied have been done so at the discretion of the manufacturer. If you need warranty assistance on any product you've purchased, please contact the manufacturer directly.Products manufactured by XDP carry a 2-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to two (2) years from the date of sale and limited solely to the parts contained within the product's kit. All products that are in question of Warranty must be returned shipping prepaid to XDP and must be accompanied by a dated proof of purchase receipt. Warranty is limited to the original purchaser.Under no circumstances shall the Xtreme Diesel Performance, LLC. be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses. YEAR MAKE MODEL FOR ENGINE SERIES 2008 Ford F-250 Super Duty 6.4 2009 Ford F-250 Super Duty 6.4 2010 Ford F-250 Super Duty 6.4 2008 Ford F-350 Super Duty 6.4 2009 Ford F-350 Super Duty 6.4 2010 Ford F-350 Super Duty 6.4 2008 Ford F-450 Super Duty 6.4 2009 Ford F-450 Super Duty 6.4 2010 Ford F-450 Super Duty 6.4 2008 Ford F-550 Super Duty 6.4 2009 Ford F-550 Super Duty 6.4 2010 Ford F-550 Super Duty 6.4
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.