Power Stroke Products Performance Valve Spring Set 01-16 6.6L GM Duramax
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Power Stroke Products
This spring set from Power Stroke Products allows you to run higher boost pressures and RPM's without experiencing valve float. These are a direct drop in, no extra cylinder head machining is required to run these springs. Depending on installed height, you will have approximately 130# installed pressure.
If you have an aftermarket turbo and are running more RPM than factory, you will see a few problems if you are still using OEM springs. First, valve float, which can cause serious damage to the valvetrain. Second, intake and exhaust valves can be blown open by boost and exhaust drive pressure which allows reversion. Reversion can hurt your power potential by allowing exhaust gasses to enter the cylinder on the intake stroke. Inert gasses in the exhaust, when re-introduced into the cylinder shield the fuel particles from oxygen in the cylinder. This does a few things that negatively affect power. It increases the time delay from start of injection to start of combustion, it decreases the maximum pressure and maximum temperature reached in the cylinder and it increases the total time needed to completely burn the available fuel.
Correct valve spring pressure is a very important piece of power production. If you are running a tuner on an otherwise stock truck with a VGT charger, based on exhaust drive pressure, these springs will help you.
Eliminate valve float caused by elevated RPM and Boost pressure!
This spring set from Power Stroke Products allows you to run higher boost pressures and RPM's without experiencing valve float. These are a direct drop in, no extra cylinder head machining is required to run these springs. Depending on installed height, you will have approximately 130# installed pressure.
If you have an aftermarket turbo and are running more RPM than factory, you will see a few problems if you are still using OEM springs. First, valve float, which can cause serious damage to the valvetrain. Second, intake and exhaust valves can be blown open by boost and exhaust drive pressure which allows reversion. Reversion can hurt your power potential by allowing exhaust gasses to enter the cylinder on the intake stroke. Inert gasses in the exhaust, when re-introduced into the cylinder shield the fuel particles from oxygen in the cylinder. This does a few things that negatively affect power. It increases the time delay from start of injection to start of combustion, it decreases the maximum pressure and maximum temperature reached in the cylinder and it increases the total time needed to completely burn the available fuel.
Correct valve spring pressure is a very important piece of power production. If you are running a tuner on an otherwise stock truck with a VGT charger, based on exhaust drive pressure, these springs will help you.
Eliminate valve float caused by elevated RPM and Boost pressure!
Diesel Power Products directs warranty claims to the respective manufacturer; coverage and duration depend on that manufacturer and product. Its one-year manufacturer-defect warranty applies only to products manufactured by Power Products Unlimited Inc., not all products it sells. Manufacturer inspection is required; DPP does not pay inspection/return shipping or labor.
Return and warranty information is based on what Diesel Power Products offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Diesel Power Products warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what Diesel Power Products offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- Diesel Power Products states a 30-day window from receipt for eligible new, uninstalled, unopened and complete items in original packaging, with prior approval/RMA. Custom tuners and specified opened tools are excluded. Customer pays return shipping; original outbound shipping, including initially free shipping, is deducted. No standard restocking percentage is stated for ordinary approved returns. Based on what Diesel Power Products offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- Diesel Power Products
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–7 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- Diesel Power Products
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.