Mishimoto Hot-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Mishimoto
What’s one of the worst things that can happen to you when you’re off roading? Your intercooler pipe blowing up, failing, falling off… well let’s hope it doesn’t just fall off, if it does then you have some pretty lousy clamps. Instead, improve the power, efficiency, and maximize flow on your 17-19 GM Duramax with Mishimoto’s hot side intercooler pipe and boot kit.
The factory hot-side pipe for the L5P is a measly 2.5" that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3" in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.
To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. This hot-side intercooler pipe and boot kit includes the Mishimoto Lifetime Warranty for a lifetime of performance.
IMPORTANT NOTE:
What’s one of the worst things that can happen to you when you’re off roading? Your intercooler pipe blowing up, failing, falling off… well let’s hope it doesn’t just fall off, if it does then you have some pretty lousy clamps. Instead, improve the power, efficiency, and maximize flow on your 17-19 GM Duramax with Mishimoto’s hot side intercooler pipe and boot kit.
The factory hot-side pipe for the L5P is a measly 2.5" that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3" in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.
To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. This hot-side intercooler pipe and boot kit includes the Mishimoto Lifetime Warranty for a lifetime of performance.
IMPORTANT NOTE:
Diesel Power Products directs warranty claims to the respective manufacturer; coverage and duration depend on that manufacturer and product. Its one-year manufacturer-defect warranty applies only to products manufactured by Power Products Unlimited Inc., not all products it sells. Manufacturer inspection is required; DPP does not pay inspection/return shipping or labor.
Return and warranty information is based on what Diesel Power Products offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Diesel Power Products warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what Diesel Power Products offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
- Return eligibility
- Diesel Power Products states a 30-day window from receipt for eligible new, uninstalled, unopened and complete items in original packaging, with prior approval/RMA. Custom tuners and specified opened tools are excluded. Customer pays return shipping; original outbound shipping, including initially free shipping, is deducted. No standard restocking percentage is stated for ordinary approved returns. Based on what Diesel Power Products offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- Diesel Power Products
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–7 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- Diesel Power Products
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.