kryptonite krtr11 death grip tie rods for most 11-19 chevy / gmc duramax
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Kryptonite Products
Part# KRTR11Fits; 2011-2024 2500/3500 GM HD TruckTie Rod Bodies come Powder Coated black and laser engraved.Disclaimer: This product will not work with fabtech lift kits due to their proprietary spindle design that utilizes their outer tie rodAttention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required.When running a McGaughys lift you may need to modify or remove the lower bump stop bracket for clearance. Engineered exclusively for the extreme demands of today's heavy duty truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011- Current 2500/3500 GM HD Truck that has the center link mounted in the factory location. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.Details:Heat treated chromoly nickel outer studs.Bulletproof, all steel inner ball sockets. Solid 1 1/4" Hexagon steel body.Left and Right hand jam nuts for the ultimate adjust ability.In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, wreck it, lift it, I think you get it? We don't care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer, and must complete warranty registration within 90 days of purchase.
Part# KRTR11Fits; 2011-2024 2500/3500 GM HD TruckTie Rod Bodies come Powder Coated black and laser engraved.Disclaimer: This product will not work with fabtech lift kits due to their proprietary spindle design that utilizes their outer tie rodAttention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required.When running a McGaughys lift you may need to modify or remove the lower bump stop bracket for clearance. Engineered exclusively for the extreme demands of today's heavy duty truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011- Current 2500/3500 GM HD Truck that has the center link mounted in the factory location. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.Details:Heat treated chromoly nickel outer studs.Bulletproof, all steel inner ball sockets. Solid 1 1/4" Hexagon steel body.Left and Right hand jam nuts for the ultimate adjust ability.In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, wreck it, lift it, I think you get it? We don't care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer, and must complete warranty registration within 90 days of purchase.
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.