Fleece Performance 13-18 Freedom Street Hd Series 6.7L Long Block Crate Engine
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Fleece Performance Engineering
Fleece Freedom Street HD Series 6.7L Long Block Crate Engine FPE-CUMM-67L-LB-HD is perfect for severe duty or heaving heavy towing applications up to 700 HP. Machined and assembled in Fleece's state-of-the-art Freedom Racing Engine shop, these engines are remanufactured with the critical upgrades to the common problem areas. Fully blueprinted with all clearances exceeding factory specifications, the Street Series engine will get you back on the road faster. Final Testing
Includes:
Compression test on all cylinders.Run-in test to verify oil pressure and flow.Vacuum testing of the entire coolant system.Torque test and measurement of crankshaft loads.Pre-torque test to pre-lube and verify oil flow to all components.
Features:
New TappetsNew Oil PumpNew Oil CoolerNew Head GasketNew Engine Oil PanNew Pistons And RingsNew Lower Gasket KitsHamilton 178/208 CamshaftCustom Age 625 Head StudsReconditioned Factory CrankshaftNew H Series Main And Rod BearingsAftermarket Heavy Duty Connecting RodsFreedom Series Street HD Cylinder HeadNew Freeze Plugs In All Block LocationsNew Front And Rear Main Seals With Wear SleeveNew Oil Pressure Relief Valve And Regulator SpringUpgraded 12mm Main Studs &Hardened Main DowelsA Case Of Amsoil Break-In Oil And Fleetguard Oil Filter
Includes Fluidampr With Full Power Kit And 5/16" Dowel Installed In Crank SnoutReconditioned Block That Is Decked, Bored, Torque Plate Honed, Align Honed, Pressure Tested, And Painted Black.Included Gaskets & Seals:Camshaft SealWater Pump SealCP3 Snout O-RingFuel Banjo WashersCrankcase Drain GasketAdditional Sensor O-RingsCP3 Nut Access Cover GasketCoolant Inlet, A/C Compressor Bracket O-Ring
The Following New Valvetrain Components Are Recommended To Accompany This Long Block But Are Not
Included:
Rocker Arm Assemblies (FPE-CUMM-RAA-CR)Pushrods (FPE-CUMM-S2-PROD)Billet Rocker Arm Bridges (FPE-BRAB-C1) Manufacturer Warranty: 12 Months / Unlimited Miles (Standard) | 12 Months / 50,000 Miles (Commercial)
Fleece Freedom Street HD Series 6.7L Long Block Crate Engine FPE-CUMM-67L-LB-HD is perfect for severe duty or heaving heavy towing applications up to 700 HP. Machined and assembled in Fleece's state-of-the-art Freedom Racing Engine shop, these engines are remanufactured with the critical upgrades to the common problem areas. Fully blueprinted with all clearances exceeding factory specifications, the Street Series engine will get you back on the road faster. Final Testing
Includes:
Compression test on all cylinders.Run-in test to verify oil pressure and flow.Vacuum testing of the entire coolant system.Torque test and measurement of crankshaft loads.Pre-torque test to pre-lube and verify oil flow to all components.
Features:
New TappetsNew Oil PumpNew Oil CoolerNew Head GasketNew Engine Oil PanNew Pistons And RingsNew Lower Gasket KitsHamilton 178/208 CamshaftCustom Age 625 Head StudsReconditioned Factory CrankshaftNew H Series Main And Rod BearingsAftermarket Heavy Duty Connecting RodsFreedom Series Street HD Cylinder HeadNew Freeze Plugs In All Block LocationsNew Front And Rear Main Seals With Wear SleeveNew Oil Pressure Relief Valve And Regulator SpringUpgraded 12mm Main Studs &Hardened Main DowelsA Case Of Amsoil Break-In Oil And Fleetguard Oil Filter
Includes Fluidampr With Full Power Kit And 5/16" Dowel Installed In Crank SnoutReconditioned Block That Is Decked, Bored, Torque Plate Honed, Align Honed, Pressure Tested, And Painted Black.Included Gaskets & Seals:Camshaft SealWater Pump SealCP3 Snout O-RingFuel Banjo WashersCrankcase Drain GasketAdditional Sensor O-RingsCP3 Nut Access Cover GasketCoolant Inlet, A/C Compressor Bracket O-Ring
The Following New Valvetrain Components Are Recommended To Accompany This Long Block But Are Not
Included:
Rocker Arm Assemblies (FPE-CUMM-RAA-CR)Pushrods (FPE-CUMM-S2-PROD)Billet Rocker Arm Bridges (FPE-BRAB-C1) Manufacturer Warranty: 12 Months / Unlimited Miles (Standard) | 12 Months / 50,000 Miles (Commercial)
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- Signature delivery required
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.