Fleece Performance 11-16 Powerflo In-Tank Fuel Lift Pump
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Fleece Performance Engineering
Get the Fleece FPE-PF-FMC-1116-SB PowerFlo In-Tank Lift Pump from XDP and experience the difference. This kit includes both the PowerFlo lift pump to replace your in-tank factory sending unit and a new frame-mounted filter base with a Donaldson filter to replace the factory pump and filter assembly. This plug-and-play kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank and the new filter base mounts in the OE filter housing location. The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, for proper installation. Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP. Combine this kit with the Fleece replacement under hood filter base (FPE-FMC-UHFA-1123) and optional fuel heater (FPE-FH-FMC) for the ultimate fuel delivery setup on your 6.7 Powerstroke!
Features:
Direct In-Tank Replacement: The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, and installs in less than half the time of other high flow lift pumps.Ultra-Quiet - Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP!Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. This kit requires no cutting, splicing, or modification of the existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.Aftermarket Capable: Want the benefits of the in-tank pump but need to run your own fuel lines. The pump outlet and return are threaded to accept an -8 O-ring fitting (3/4"-16 thread).Kit
Includes:
Powerflo Lift Pump With Integral Fuel Level SenderFilter Base With Donaldson (P/N P553203) And Provision For Optional Fuel Heater (4 Micron Rating At 99% Efficiency)Water-In-Fuel SensorChassis Wiring Harness And WIF Sensor Extension HarnessFuel Sending Unit Tank O-RingMounting HardwareApplication NotesOperating pressure of: 65-70 psi at idle
This product has been tested and verified to work with 2011-2016 trucks equipped with an S&S Diesel Motorsport DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.This product has been confirmed to fit Titan and S&B aftermarket fuel tanks. Manufacturer Warranty: Limited Lifetime
Get the Fleece FPE-PF-FMC-1116-SB PowerFlo In-Tank Lift Pump from XDP and experience the difference. This kit includes both the PowerFlo lift pump to replace your in-tank factory sending unit and a new frame-mounted filter base with a Donaldson filter to replace the factory pump and filter assembly. This plug-and-play kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank and the new filter base mounts in the OE filter housing location. The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, for proper installation. Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP. Combine this kit with the Fleece replacement under hood filter base (FPE-FMC-UHFA-1123) and optional fuel heater (FPE-FH-FMC) for the ultimate fuel delivery setup on your 6.7 Powerstroke!
Features:
Direct In-Tank Replacement: The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, and installs in less than half the time of other high flow lift pumps.Ultra-Quiet - Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP!Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. This kit requires no cutting, splicing, or modification of the existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.Aftermarket Capable: Want the benefits of the in-tank pump but need to run your own fuel lines. The pump outlet and return are threaded to accept an -8 O-ring fitting (3/4"-16 thread).Kit
Includes:
Powerflo Lift Pump With Integral Fuel Level SenderFilter Base With Donaldson (P/N P553203) And Provision For Optional Fuel Heater (4 Micron Rating At 99% Efficiency)Water-In-Fuel SensorChassis Wiring Harness And WIF Sensor Extension HarnessFuel Sending Unit Tank O-RingMounting HardwareApplication NotesOperating pressure of: 65-70 psi at idle
This product has been tested and verified to work with 2011-2016 trucks equipped with an S&S Diesel Motorsport DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.This product has been confirmed to fit Titan and S&B aftermarket fuel tanks. Manufacturer Warranty: Limited Lifetime
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.