Fleece Performance 07.5-12 Freedom Street Series 6.7L Long Block Crate Engine
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Fleece Performance Engineering
Fleece Freedom Street Series 6.7L Long Block Crate Engine FPE-CUMM-67E-LB is perfect for a daily driver or towing application. Machined and assembled in Fleece's state-of-the-art Freedom Racing Engine shop, these engines are remanufactured with the critical upgrades to the common problem areas. Fully blueprinted with all clearances exceeding factory specifications, the Street Series engine will get you back on the road faster.All long blocks are run on a fully automated engine test stand after assembly. This testing includes:Vacuum testing of the entire coolant system.Pre-torque test to pre-lube and verify oil flow to all components.Torque test and measurement of crankshaft loads.Run-in test to verify oil pressure and flow.Compression test on all cylinders.
Features:
New TappetsNew Oil PumpNew Oil CoolerNew Head GasketNew Engine Oil PanGenuine Cummins RodsNew Pistons And RingsNew Lower Gasket KitsCustom Age 625 Head StudsReconditioned Factory CamshaftReconditioned Factory CrankshaftNew P Series Main And Rod BearingsFreedom Series Street Cylinder HeadNew Main Bolts And Hardened Main DowelsNew Freeze Plugs In All Block LocationsNew Front And Rear Main Seals With Wear SleeveNew Oil Pressure Relief Valve And Regulator SpringA Case Of Amsoil Break-In Oil And Fleetguard FilterReconditioned Block That Is Decked, Bored, Torque Plate Honed, Align Honed, Pressure Tested, And Painted Black.Included Gaskets & Seals:Camshaft SealWater Pump SealCP3 Snout O-RingFuel Banjo WashersCrankcase Drain GasketAdditional Sensor O-RingsCP3 Nut Access Cover GasketCoolant Inlet, A/C Compressor Bracket O-Ring
The following new valvetrain components are recommended to accompany this long block but are not included:Rocker Arm Assemblies (FPE-CUMM-RAA-CR)Pushrods (FPE-CUMM-S2-PROD)Billet Rocker Arm Bridges (FPE-BRAB-C1) Manufacturer Warranty: 12 Months / Unlimited Miles (Standard) | 12 Months / 50,000 Miles (Commercial)
Note:
Buyer must retain all records and documented proof of adherence to the published Engine Break-in Procedure.Proper valve lashing is required. Back off adjusters on rocker arms during installation or damage will occur to the cylinder head and/or piston to valve contact may occur.Buyer MUST complete the Warranty Registration Form within 30 days of purchase or warranty will be VOID. To complete the registration, follow the QR code included with your engine package.
Fleece Freedom Street Series 6.7L Long Block Crate Engine FPE-CUMM-67E-LB is perfect for a daily driver or towing application. Machined and assembled in Fleece's state-of-the-art Freedom Racing Engine shop, these engines are remanufactured with the critical upgrades to the common problem areas. Fully blueprinted with all clearances exceeding factory specifications, the Street Series engine will get you back on the road faster.All long blocks are run on a fully automated engine test stand after assembly. This testing includes:Vacuum testing of the entire coolant system.Pre-torque test to pre-lube and verify oil flow to all components.Torque test and measurement of crankshaft loads.Run-in test to verify oil pressure and flow.Compression test on all cylinders.
Features:
New TappetsNew Oil PumpNew Oil CoolerNew Head GasketNew Engine Oil PanGenuine Cummins RodsNew Pistons And RingsNew Lower Gasket KitsCustom Age 625 Head StudsReconditioned Factory CamshaftReconditioned Factory CrankshaftNew P Series Main And Rod BearingsFreedom Series Street Cylinder HeadNew Main Bolts And Hardened Main DowelsNew Freeze Plugs In All Block LocationsNew Front And Rear Main Seals With Wear SleeveNew Oil Pressure Relief Valve And Regulator SpringA Case Of Amsoil Break-In Oil And Fleetguard FilterReconditioned Block That Is Decked, Bored, Torque Plate Honed, Align Honed, Pressure Tested, And Painted Black.Included Gaskets & Seals:Camshaft SealWater Pump SealCP3 Snout O-RingFuel Banjo WashersCrankcase Drain GasketAdditional Sensor O-RingsCP3 Nut Access Cover GasketCoolant Inlet, A/C Compressor Bracket O-Ring
The following new valvetrain components are recommended to accompany this long block but are not included:Rocker Arm Assemblies (FPE-CUMM-RAA-CR)Pushrods (FPE-CUMM-S2-PROD)Billet Rocker Arm Bridges (FPE-BRAB-C1) Manufacturer Warranty: 12 Months / Unlimited Miles (Standard) | 12 Months / 50,000 Miles (Commercial)
Note:
Buyer must retain all records and documented proof of adherence to the published Engine Break-in Procedure.Proper valve lashing is required. Back off adjusters on rocker arms during installation or damage will occur to the cylinder head and/or piston to valve contact may occur.Buyer MUST complete the Warranty Registration Form within 30 days of purchase or warranty will be VOID. To complete the registration, follow the QR code included with your engine package.
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- Signature delivery required
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.