Carli Suspension CS-DLVL-CS-19-D 2.5" Leveling System (With 1" Rear Blocks) 19-24 Dodge / Ram
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Carli Suspension
IN THIS KIT: (1) CS-DLRC-14-LVL-D, (1) AS-DLVLSPKG-CS20IFP-A, (1) CS-DRBLK-1, (1) CS-DUBK-19-425
The Carli Suspension 2.5" Leveling System (With 1" Rear Blocks) offers enough room for 35" tires on your Ram 3500 4WD. This system is designed for the customer that keeps their truck on the road with an eye for quality and appreciation for bang-for-their-buck. Utilizing Carli SPEC 2.0" Diameter, Internal Reservoir shocks, Carli developed a tune that delivers all-around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The 2.5" lift height doesn't require the front or rear geometry correction of their 3" Systems.At the heart of this system is a 2.5" lift, Linear Rate Coil Spring paired to match travel mono-tube, internal reservoir, Carli SPEC 2.0. These shocks boast 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are spec'd with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for a massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, this is the perfect kit.The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of an Adjustable Track Bar (not included). Further, ride quality can be substantially increased with the addition of our Torsion Sway Bar. Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.This system will NOT be upgradable to any other Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Features:
Fits Up To 35" TiresIncreases Wheel Travel To 9.5" Front & 11.3" RearDoes Not Include Leaf Spring Option And Sway Bar OptionCorrosion Resistant Aluminum Bodies Provide Long-Lasting FinishCarli-Tuned 2.0 Shocks Provide Comfortable On-Road Feel & Better Off-Road PerformanceSystem Includes Multi-Rate Front Coil Springs, Front And Rear Shock Package, 1" Block & U-Bolt KitOptional Parts To Support This System:Adjustable Track Bar: CS-DATB-1419Torsion Sway Bar: CS-DTSB3-1419Radius Arm Drop Bracket: CS-DRAD-1419Leaf Spring Shackle: CS-DSHACKLE-0313Steering Stabilizer - High Mount: CS-DHMSS-14Steering Stabilizer - Low Mount: CS-DLMSS-14Radius Arms: CS-DFRA-LVL-14Front Differential Guard: CS-DFDG-14Lifetime Ball Joints: CS-DBJP-14Note: In 2019, Ram lowered the rear of the 3500 SRW - for this reason, Carli now provides a 1" Billet Block and U-Bolts to fit the larger AAM 12" Axle (4.25" Axle Tubes).If you have a 2019+ DRW, you do not need the 1" block to achieve a level stance - order the 2013-2018 option, instead.
IN THIS KIT: (1) CS-DLRC-14-LVL-D, (1) AS-DLVLSPKG-CS20IFP-A, (1) CS-DRBLK-1, (1) CS-DUBK-19-425
The Carli Suspension 2.5" Leveling System (With 1" Rear Blocks) offers enough room for 35" tires on your Ram 3500 4WD. This system is designed for the customer that keeps their truck on the road with an eye for quality and appreciation for bang-for-their-buck. Utilizing Carli SPEC 2.0" Diameter, Internal Reservoir shocks, Carli developed a tune that delivers all-around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The 2.5" lift height doesn't require the front or rear geometry correction of their 3" Systems.At the heart of this system is a 2.5" lift, Linear Rate Coil Spring paired to match travel mono-tube, internal reservoir, Carli SPEC 2.0. These shocks boast 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are spec'd with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for a massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, this is the perfect kit.The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of an Adjustable Track Bar (not included). Further, ride quality can be substantially increased with the addition of our Torsion Sway Bar. Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.This system will NOT be upgradable to any other Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Features:
Fits Up To 35" TiresIncreases Wheel Travel To 9.5" Front & 11.3" RearDoes Not Include Leaf Spring Option And Sway Bar OptionCorrosion Resistant Aluminum Bodies Provide Long-Lasting FinishCarli-Tuned 2.0 Shocks Provide Comfortable On-Road Feel & Better Off-Road PerformanceSystem Includes Multi-Rate Front Coil Springs, Front And Rear Shock Package, 1" Block & U-Bolt KitOptional Parts To Support This System:Adjustable Track Bar: CS-DATB-1419Torsion Sway Bar: CS-DTSB3-1419Radius Arm Drop Bracket: CS-DRAD-1419Leaf Spring Shackle: CS-DSHACKLE-0313Steering Stabilizer - High Mount: CS-DHMSS-14Steering Stabilizer - Low Mount: CS-DLMSS-14Radius Arms: CS-DFRA-LVL-14Front Differential Guard: CS-DFDG-14Lifetime Ball Joints: CS-DBJP-14Note: In 2019, Ram lowered the rear of the 3500 SRW - for this reason, Carli now provides a 1" Billet Block and U-Bolts to fit the larger AAM 12" Axle (4.25" Axle Tubes).If you have a 2019+ DRW, you do not need the 1" block to achieve a level stance - order the 2013-2018 option, instead.
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.