Carli Suspension CLSCS-DLTB-03-40 Long Travel Air Bag System (4" Axle Tube) 03-11 Dodge / Ram
This product is vehicle-specific. Select your year, make, model, engine and transmission to confirm compatibility before adding it to your cart.
Select your truck to continue
Ships directly from the supplier. The final shipping cost will be shown before payment.
- Ships from Carli Suspension
Get the Carli Suspension Long Travel Air Bag System CS-DLTB-03-40 for your Dodge Ram 2500/3500 with a 1"-2" lift. Heavy Duty trucks ride rough, and that's a fact. That's where Carli comes in. In the endless pursuit to make your 3/4-1 ton pickup ride like a comfortable SUV, you'll likely be replacing the factory, immobile leaf springs with a softer alternative resulting in a payload reduction. These airbags allow you to have your cake and eat it too. Let's talk about the bags. Carli worked with their manufacturer on a no-compromise airbag to meet the demands of customers. These bags Boast BILLET upper and lower pistons. The Pistons themselves are tapered as is the sleeve of the bag. Larger upper piston, smaller lower piston means less spring rate ramp. If you were to run the same size upper and lower pistons (think every other double bellow airbag kit), you get exponentially increasing spring rate as the bags compress making the rear end short travel, volatile and VERY hard to control. It's stiff until it stops, then rebounds (bounces out) VERY hard. If you've ever been in a truck with these style of airbags, you know exactly to what I am referring. These bags are still bags, the rate still ramps much faster than a typical spring would but these are the least of all available evils. Carli runs Tapered pistons and limit the bags to 2,000lb. (ea.) capacity at their 100psi "working" load. They get the question a lot; "what's working load?" Working load means the bag itself will see MUCH higher loads than the 100psi to which you're inflating them. Throw a trailer on the back - theoretically, let's say you fill these to 100psi to get the truck perfectly level. Drive down the road, hit a speed bump that sends the axle 3" up the travel stroke and you've compressed that 100psi effectively increasing the pressure. So what pressure can these bags take? We test them continually - from every batch of airbags, since their release circa 2010, in a LOADED fixer. This means the bag is compressed to working height before inflated to failure. On average, they Burst between 500-600psi. These are the bags run in every Carli Long-Travel Airbag kit - we don't offer multiple bag lengths - just different bracketry to fit these to different applications. With the Airbag systems, we include all brackets and hardware to attach to the truck as well as air fittings, airline (1/4" - can be plumbed to compressors, too) and schrader valves to install these bags for manual fill as this is the most reliable!
Features:
Supports Up To 12 Inches Of TravelCompatible With 1"-2" Rear Lift, 4" Requires CS-AIRBAGSPCRRestore Factory Payload To Full Progressive Spring Equipped RamsAdjustable Rear Loaded Height, 2,000lbs (Each) Capacity At 100psiDual Rear Brake Line ONLYIncludes Extended Rear Brake Lines Required For The Traction Control Equipped RamsNote: For 4.0" Axle Tube For Non-Traction Control Equipped, Single Rear Brake Line Only
Get the Carli Suspension Long Travel Air Bag System CS-DLTB-03-40 for your Dodge Ram 2500/3500 with a 1"-2" lift. Heavy Duty trucks ride rough, and that's a fact. That's where Carli comes in. In the endless pursuit to make your 3/4-1 ton pickup ride like a comfortable SUV, you'll likely be replacing the factory, immobile leaf springs with a softer alternative resulting in a payload reduction. These airbags allow you to have your cake and eat it too. Let's talk about the bags. Carli worked with their manufacturer on a no-compromise airbag to meet the demands of customers. These bags Boast BILLET upper and lower pistons. The Pistons themselves are tapered as is the sleeve of the bag. Larger upper piston, smaller lower piston means less spring rate ramp. If you were to run the same size upper and lower pistons (think every other double bellow airbag kit), you get exponentially increasing spring rate as the bags compress making the rear end short travel, volatile and VERY hard to control. It's stiff until it stops, then rebounds (bounces out) VERY hard. If you've ever been in a truck with these style of airbags, you know exactly to what I am referring. These bags are still bags, the rate still ramps much faster than a typical spring would but these are the least of all available evils. Carli runs Tapered pistons and limit the bags to 2,000lb. (ea.) capacity at their 100psi "working" load. They get the question a lot; "what's working load?" Working load means the bag itself will see MUCH higher loads than the 100psi to which you're inflating them. Throw a trailer on the back - theoretically, let's say you fill these to 100psi to get the truck perfectly level. Drive down the road, hit a speed bump that sends the axle 3" up the travel stroke and you've compressed that 100psi effectively increasing the pressure. So what pressure can these bags take? We test them continually - from every batch of airbags, since their release circa 2010, in a LOADED fixer. This means the bag is compressed to working height before inflated to failure. On average, they Burst between 500-600psi. These are the bags run in every Carli Long-Travel Airbag kit - we don't offer multiple bag lengths - just different bracketry to fit these to different applications. With the Airbag systems, we include all brackets and hardware to attach to the truck as well as air fittings, airline (1/4" - can be plumbed to compressors, too) and schrader valves to install these bags for manual fill as this is the most reliable!
Features:
Supports Up To 12 Inches Of TravelCompatible With 1"-2" Rear Lift, 4" Requires CS-AIRBAGSPCRRestore Factory Payload To Full Progressive Spring Equipped RamsAdjustable Rear Loaded Height, 2,000lbs (Each) Capacity At 100psiDual Rear Brake Line ONLYIncludes Extended Rear Brake Lines Required For The Traction Control Equipped RamsNote: For 4.0" Axle Tube For Non-Traction Control Equipped, Single Rear Brake Line Only
HSP offers a limited lifetime warranty to the original purchaser on eligible HSP products. Underhood powder coating has separate two-year limited coverage. Non-HSP brands follow their own manufacturer warranties. Discontinued products and customer/installer damage are excluded. Claim authorization is required; customer pays inbound shipping for ordinary claims.
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
HSP Diesel warranty policyView complete warrantyProduct conditions
Return and warranty information is based on what HSP Diesel offers. Product-specific eligibility and the supplier’s published conditions apply; FullSpecDiesel does not add or extend coverage.
Professional installation is recommended.
- Return eligibility
- HSP states returns must be postmarked within 30 days of purchase, new and unused with original tags and packaging, with an approved RMA. A 15% restocking fee and customer-paid return shipping apply. Special orders, non-HSP dropship products, apparel, used items and custom colors are excluded. Based on what HSP Diesel offers.
- Return window
- Not stated for this product; see supplier terms
- Restocking fee
- See supplier terms; no product-specific fee stated
- Return shipping
- Based on the supplier’s return policy; see terms
- Made to order
- No
- Backorder status
- Not backordered
- Cancellation
- Subject to supplier terms; contact FullSpecDiesel before requesting cancellation
- Warranty provider
- HSP Diesel
- Warranty duration
- Product-specific duration not stated; see supplier terms
- Compatibility
- Listed for specific vehicle configurations
- Legal use
- Street legal
- Processing estimate
- 3–10 business days supplier processing
- Shipping
- Shipping calculated at checkout
- Signature
- No signature requirement
- Supplier
- HSP Diesel
Product compatibility is based on the vehicle and product information provided. Review your selected truck, product options, measurements, modifications, and installation requirements before ordering.